Chase Research IOPRINT+ Print Server User Manual download pdf (Page 14)

Page 14

Set IP

Address

For TCP/IP networks only:

• If a IOPRINT+ Print Server does not appear on the main

screen, use this option to set a Device IP Address, Gateway

IP Address, and Network Mask to the IOPRINT+ Print

Server.

• This should only be necessary if your LAN is using ONLY

the TCP/IP protocol. In other cases, BiAdmin will use

IPX/SPX to locate the IOPRINT+ Print Server even if it

doesn’t have a valid IP Address.

• To locate the IOPRINT+ Print Server, enter the default

device name. This name is shown on a sticker on the base

of the device, in the form SCxxxxxx (SC followed by 6

digits).

• Enter the required IP Address, Network Mask, and

Gateway IP Address.

• After saving the data to the device, refresh the listing. The

IOPRINT+ Print Server should then appear in the device

list on the main screen.

Configuration Menu

System

Selecting this option will reveal the following screen.

1 2 ... 9 10 11 12 13 14 15 16

No comments

Chase Research IOPRINT+ Print Server User Manual Page 14