Chase Research IOPRINT+ Print Server User's Guide download pdf (Page 47)

Unix - TCP/IP

Page 47

Chapter 2 Installation and Configuration

IP Address Configuration

The IOPRINT+ Print Server requires the following IP Addresses to be entered.

(The entry in brackets shows the line number and token in the device's configuration file. This

information is for people using FTP.)

Device IP Address Normally, the IOPRINT+ Print Server is assigned a static IP Address. If you leave its IP

Address at the default value of 0.0.0.0, its sequence for finding an IP Address dynamically is

as follows:

DHCP, BOOTP, RARP.

See Dynamic IP Address Configuration on page 52 for more details.

Item Description

IP Address

(4000 IP_ADDR)

Device IP Address. See the following

section.

Gateway Address

(4001 GATEWAY)

If your network segment has a router,

enter the router address here.

If there is no router, leave the address

as 0.0.0.0.

Subnet Mask

(4002 MASK)

If the Gateway Address above is

0.0.0.0 the Subnet Mask should also

be left at 0.0.0.0.

If you have a router, enter the Subnet

mask for the segment to which the

IOPRINT+ Print Server is attached.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 304 305

No comments

Chase Research IOPRINT+ Print Server User's Guide Page 47